Model WX10000.1

RMS Power in Watts
@14.4V, 2O Mono, =1.5% THD+N
@14.4V, 4O Mono, =1.5% THD+N
10000 × 1
5000 × 1
Length 35” (888mm)
Height 3 3/4” (96mm)
Width 17 3/4” (450mm)
Weight 66.8 lb (30.3kg)
Frequency Response, + 0 / – 1 dB 20 Hz – 200 Hz
Signal-to-Noise Ratio >95 dB, a-weighted, re: rated power
Input Sensitivity 170 mV – 5 V low level
Low Pass Crossover Variable Low-Pass, 50 – 200Hz, 24dB per octave
High Pass Sub-Sonic Crossover Variable High Pass, 20 – 60Hz, 24dB per octave
Bass Boost Variable 0 to +18 dB boost @ 40 Hz

The WX amplifier outputs dangerous voltage levels from the voice coil (speaker) outputs.

Never contact the voice coil outputs, connect speakers, or speaker wires if the amplifier is turned on. Turning the amplifier on without loading both voice coil outputs or connecting the speaker(s) will increase the risk of electrical shock and could damage the amplifier.

Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it’s agents are not responsible for typographical errors.

• Sub sonic filter
• Low pass crossover
• Bass boost
• Gain control
• Remote bass control
• Adjustable limiter
• LED status/protection indicator
• Stereo RCA inputs with paralleled outputs
• In/out PS2 multi pin din connector for WXRC and linking amps together
• Anderson 8 gauge 50 amp power pole speaker connections
• 1/0 gauge +12V power and ground terminals
• 3 each
• Custom made planar transformers
• Push/pull fan configuration
• TRULY 90% efficient

Average:
5